Sewing Machine Needle Threader Stitch Insertion Tool Automatic Threader Quick Sewing Threader Needle Changer Hold Needles Firmly
9.95 $11.76
Overview:
The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method. The limitation function of the charging power and current and reducingcharging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.
Features:
Advanced MPPT technology, with efficiency no less than 99.5%\Ultra-fast tracking speed and guaranteed tracking efficiency
Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
Wide MPP operating voltage range
High quality components, perfecting system performance, with maximum conversion efficiency of 98%
Accurate recognition and tracking of multiple-peaks maximum power point
International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
Charging power and current limitation function
Compatible with lead-acid and lithium-ion batteries
Battery temperature compensation function
Real-time energy statistics function
Overheating power reduction function
Multiple load work modes
The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.
With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
Monitor and set the parameters via mobile phone APP or PC software
Full-load operation without any drop in capacity within the range of working environment temperature
Extensive electronic protection
Technical Specifications:
Item | Tracer 1206AN | Tracer 2206AN | Tracer 1210AN | Tracer 2210AN | Tracer 3210AN | Tracer 4210AN |
System nominal | 12V/24VDC Auto | |||||
Rated charge current | 10A | 20A | 10A | 20A | 30A | 40A |
Rated discharge | 10A | 20A | 10A | 20A | 30A | 40A |
Battery voltage range | 8~32V | |||||
Max. PV open circuit voltage | 46V | 92V | ||||
MPP voltage range | (Battery voltage +2V)~36V | (Battery voltage +2V)~72V | ||||
Max. PV input power | 130W/12V | 260W/12V | 130W/12V | 260W/12V | 390W/12V | 520W/12V |
Self-consumption | <=12mA | |||||
Discharge circuit voltage drop | <=0.23V | |||||
Temperature compensate coefficient | -3mV/°C/2V (Default) | |||||
Grounding | Common negative | |||||
RS485 interface | 5VDC/100mA | |||||
LCD backlight time | 60S (Default) | |||||
Environmental Parameters | ||||||
Working environment temperature | -25°C~+50°C(100% input and output) | |||||
Storage temperature range | -20°C~+70°C | |||||
Relative humidity | <=95%, N.C. | |||||
Enclosure | IP30 | |||||
Dimension | 172x139 x 44mm | 220x154x 52mm | 172x139 x 44mm | 220x154x 52mm | 228x164x55mm | 252x180x63mm |
Mounting dimension | 130x130mm | 170x145mm | 130x130mm | 170x145mm | 170x164mm | 210x171mm |
Terminal | 12AWG(4mm 2 ) | 6AWG(16mm 2 ) | 12AWG(4mm 2 ) | 6AWG(16mm 2 ) | 6AWG(16mm 2 ) | 6AWG(16mm 2 |
Recommended cable | 12AWG(4mm 2 ) | 10AWG(6mm 2 ) | 12AWG(4mm 2 ) | 10AWG(6mm 2 ) | 8AWG(10mm 2 ) | 6AWG(16mm 2 ) |
Weight | 0.57kg | 0.94kg | 0.57kg | 0.94kg | 1.26kg | 1.65kg |
Accessories (optional):
Remote Temperature Sensor (RTS300R47K3.81A) | Acquisition of battery temperature for undertaking temperature compensation of controlparameters, the standard length of the cable is 3m (length can be customized). The RTS300R47K3.81A connects to the port (4th) on the controller. NOTE: The temperature sensor short-circuited or damaged, the controller will be charging or discharging at the default temperature 25°C | ||
USB to RS485 cable CC-USB-RS485-150U | USB to RS-485 converter is used to monitor each controller on the network using Solar Station PC software. The length of cable is 1.5m. TheCC-USB-RS485-150U connects to the RS-485 Port on the controller. | ||
OTG cable OTG-12CM | Used to connect a mobile communication cable and able to achieve real-time monitoring of the controller and modification of the parameters by using mobile APP software. | ||
Remote Meter MT50 | MT50 can display various operating data and fault of the system. The information can be displayed on a backlit LCD screen, the buttons are easy-to-operate, and the numeric display is readable. | ||
WIFI Serial Adapter eBox-WIFI-01 | After the controller is connected with the eBox-WIFI-01 through the standard Ethernet cable (parallel cable), the operating status and related parameters of the controller can be monitored by the mobile APP software through WIFI signals. | ||
RS485 to Bluetooth Adapter eBox-BLE-01 | After the controller is connected with the eBox-BLE-01 through the standard Ethernet cable (parallel cable), the operating status and related parameters of the controller can be monitored by the mobile APP software through Bluetooth signals. |
Photo:
Chúng tôi tự hào cung cấp dịch vụ vận chuyển quốc tế hiện đang hoạt động tại hơn 200 quốc gia và hải đảo trên toàn thế giới. Không có gì có ý nghĩa hơn đối với chúng tôi ngoài việc mang lại cho khách hàng những giá trị và dịch vụ tuyệt vời. Chúng tôi sẽ tiếp tục phát triển để đáp ứng nhu cầu của tất cả khách hàng, mang đến một dịch vụ vượt ngoài mong đợi ở mọi nơi trên thế giới.
Các gói hàng từ kho của chúng tôi ở Trung Quốc, Việt Nam sẽ được vận chuyển bằng ePacket hoặc EMS tùy thuộc vào trọng lượng và kích thước của sản phẩm. Các gói hàng được vận chuyển từ kho hàng tại Hoa Kỳ của chúng tôi được vận chuyển qua USPS.
Có. Chúng tôi cung cấp dịch vụ vận chuyển miễn phí đến hơn 200 quốc gia trên thế giới. Tuy nhiên, có một số địa điểm chúng tôi không thể vận chuyển đến. Nếu bạn sống ở một trong những quốc gia đó, chúng tôi sẽ liên hệ với bạn.
Chúng tôi không chịu trách nhiệm về bất kỳ khoản phí tùy chỉnh nào sau khi các mặt hàng đã được vận chuyển. Bằng cách mua sản phẩm của chúng tôi, bạn đồng ý rằng một hoặc nhiều gói hàng có thể được vận chuyển cho bạn và có thể nhận được phí tùy chỉnh khi chúng đến quốc gia của bạn.
Thời gian vận chuyển khác nhau tùy theo địa điểm. Đây là những ước tính của chúng tôi:
Vị trí | * Thời gian vận chuyển ước tính |
---|---|
Việt Nam, Châu Á | 10-30 ngày làm việc |
Hoa Kỳ | 10-30 ngày làm việc |
Canada, Châu Âu | 15-35 ngày làm việc |
Úc, New Zealand | 10-30 ngày làm việc |
Mexico, Trung Mỹ, Nam Mỹ | 25-55 ngày làm việc |
Có, bạn sẽ nhận được email sau khi đơn đặt hàng của bạn được giao có chứa thông tin theo dõi của bạn.
Đối với một số công ty vận chuyển, mất 2-5 ngày làm việc để thông tin theo dõi cập nhật trên hệ thống.
Vì lý do hậu cần, các mặt hàng trong cùng một giao dịch mua đôi khi sẽ được gửi theo từng gói riêng biệt, ngay cả khi bạn đã chỉ định hình thức vận chuyển kết hợp.
Nếu bạn có bất kỳ câu hỏi nào khác, vui lòng liên hệ với chúng tôi và chúng tôi sẽ cố gắng hết sức để giúp bạn.
Tất cả các đơn đặt hàng có thể bị hủy cho đến khi chúng được chuyển đi. Nếu đơn đặt hàng của bạn đã được thanh toán và bạn cần thay đổi hoặc hủy đơn đặt hàng, bạn phải liên hệ với chúng tôi trong vòng 12 giờ. Sau khi quá trình đóng gói và vận chuyển đã bắt đầu, bạn không thể hủy quá trình này nữa.
Sự hài lòng của bạn là ưu tiên số 1 của chúng tôi. Do đó, nếu bạn muốn được hoàn lại tiền, bạn có thể yêu cầu bất kỳ lý do nào.
Nếu bạn không nhận được sản phẩm trong thời gian đảm bảo (60 ngày không bao gồm quá trình xử lý 2-5 ngày), bạn có thể yêu cầu hoàn lại tiền hoặc đổi hàng.
Nếu bạn nhận được sai mặt hàng, bạn có thể yêu cầu hoàn lại tiền hoặc đổi hàng.
Nếu bạn không muốn sản phẩm mà bạn đã nhận, bạn có thể yêu cầu hoàn lại tiền nhưng bạn phải trả lại mặt hàng đó với chi phí của bạn và mặt hàng đó phải được sử dụng.
* Bạn có thể gửi yêu cầu hoàn lại tiền trong vòng 15 ngày sau khi thời hạn giao hàng được đảm bảo (90 ngày) đã hết. Bạn có thể làm điều đó bằng cách gửi tin nhắn tại Trang Liên Hệ
Nếu bạn được chấp thuận cho khoản tiền hoàn lại, thì khoản tiền hoàn lại của bạn sẽ được xử lý và một khoản tín dụng sẽ tự động được áp dụng cho thẻ tín dụng hoặc phương thức thanh toán ban đầu của bạn, trong vòng 14 ngày.
Nếu vì bất kỳ lý do gì bạn muốn đổi sản phẩm của mình, có thể lấy một cỡ quần áo khác. Bạn phải liên hệ với chúng tôi trước và chúng tôi sẽ hướng dẫn bạn thực hiện các bước.
Vui lòng không gửi lại giao dịch mua của bạn cho chúng tôi trừ khi chúng tôi cho phép bạn làm như vậy.
Thank you for your interest doing business with us!
If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.© 2022 Totday Online Marketplace.